This is topic 8mm projectors in forum General Yak at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=003733

Posted by Ousama Al Balaa (Member # 5135) on November 30, 2015, 10:26 PM:
 
I am in Canada. I am converting 8mm movies to digital formats. I have not been successful as I am getting flickers and the bulb on the Bell & Howell projector burnt out. Replacement DJL bulbs are very expensive and last only 15 hours. I have read a lot on line but unfortunately no concrete answers are offered.
Any suggestions for help?
 
Posted by Janice Glesser (Member # 2758) on November 30, 2015, 11:25 PM:
 
Ousama...take a look at this video by George Tveden. He shows how to replace the DJL lamp with a halogen lamp.

https://www.youtube.com/watch?v=kUfryuOhJ-A

I have done this as he has described and it's very easy. Here is how my conversion turned out.

http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009488#000010
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2