8mm Forum: Leads to connect sound projector to audio.

This is topic Leads to connect sound projector to audio. in forum General Yak at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=004746

Posted by Al Wilkie (Member # 4672) on March 09, 2018, 02:03 PM:

I want to take sound off on a Noris 342 stereo sound projector & record it on my recorder that has 3.5 stereo jack socket (much the same as most computers etc).

Would a 7 pin din to 3.5 stereo like this one do the trick, or is the Noris 342 wired differently?

https://www.amazon.co.uk/dp/B06XPDRJMG?ref_= pfb_ff90dn4g9c7ii97am8el7lcncm6g&tag=hydfbook-21&ascsubtag=pfb-P01-V01-O5-T1-HI-QOC1YI

Posted by Brian Fretwell (Member # 4302) on March 09, 2018, 02:14 PM:

Not sure about the Noris, but not many DIM sockets for audio had 7 pins, most were 5 pin. Left and right for both in and out can't remember what the middle pin was for. The ad says for a specific B&O system with 7 pins so it might not fit without removing a couple of them.

Posted by Steve Klare (Member # 12) on March 09, 2018, 02:21 PM:

If there was only one unexplained pin it was probably chassis: return for all of them.

Posted by Maurice Leakey (Member # 916) on March 09, 2018, 02:51 PM:

Al
The Super 8 database says the output jack is a 5-pin DIN.
http://www.filmkorn.org/super8data/database/projectors_list/projectors_noris/noris_norisound_342.htm
This is the lead you need.
https://www.amazon.co.uk/kenable-3-5mm-Stereo-Audio-Cable/dp/B003OSNVC4

Posted by Al Wilkie (Member # 4672) on March 09, 2018, 04:57 PM:

Thanks everyone for your help.

Posted by Maurice Leakey (Member # 916) on March 10, 2018, 02:09 AM:

It's probable that a screened cable is used, if so, the screen is connected to the centre pin (no.2).

UBB.classic^TM 6.3.1.2