This is topic Sprocket problem in Eumig 824 in forum General Yak at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=005338
Posted by Panayotis A. Carayannis (Member # 1220) on November 18, 2019, 03:03 PM:
 
In my Eumig 824, both upper and lower sprockets are running free. They lock in their axis (!) but can run them with my finger Don't know if I am expressing this properly.Seems like the gears from the inside are not connecting with each other. HELP!
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2