This is topic Threading up a Pathe Baby with attachments in forum 9.5mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=9;t=000075

---

Posted by Bob Pucci (Member # 8) on March 29, 2009, 06:13 PM:
 
Can someone tell the correct procedure threading the baby with super attachment arms after the film leaves the claw area and goes into the take-up area where if you were using notched film ends up.When my take-up reel turns it seems that it is pulling the film too tight.
 

---

Posted by Dino Everette (Member # 1378) on March 30, 2009, 01:24 AM:
 
maybe this can help, this is the "centerfold" page from the 1925 French Baby catalog. (And my wife wonders why I call it projector porn).


 

---

Posted by Hugh McCullough (Member # 696) on March 30, 2009, 06:44 AM:
 
Hello Bob.

I have loaded up to my web site the information that you require as a PDF file.
It may be downloaded at:-
www.cinephoto.co.uk/pathbabatt.htm
and will be available until April 2nd.

Hugh.
 

---

Posted by Bob Pucci (Member # 8) on March 30, 2009, 09:36 AM:
 
Hi Hugh

That was exactly what I needed.I downloaded it.Thanks very much.

Bob
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2