8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Fuse for Eumig 926?

 - UBBFriend: Email this page to someone!    
Author Topic: Fuse for Eumig 926?
Jim Carlile
Film Handler

Posts: 95
From: Burbank, California, USA
Registered: Apr 2007


 - posted November 25, 2008 12:59 AM      Profile for Jim Carlile   Email Jim Carlile   Send New Private Message       Edit/Delete Post 
Years ago I used to know the Buss # for slow-blow fuses for the 926. Anyone remember what it is? I think it was AGC something, but not sure if this is slow blow-- my local electronics store isn't much help, and the sample fuse is a bit worn! Thanks!

 |  IP: Logged

Mike Tynus
Expert Film Handler

Posts: 135
From: Addison, IL, USA
Registered: Apr 2008


 - posted November 25, 2008 01:53 AM      Profile for Mike Tynus     Send New Private Message       Edit/Delete Post 
Don't know the Buss number, but you need a 3.15 amp 5x20mm slow-blow fuse for the amp.
Here's a link:
http://www.radioshack.com/product/index.jsp?productId=2102761

Hope this helps.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2