8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Lamp Conversion

- UBBFriend: Email this page to someone!    
Author Topic: Lamp Conversion
Jim Schrader
Phenomenal Film Handler

Posts: 1628
From: Savage, MN, USA
Registered: Jun 2003

- posted February 01, 2015 12:31 PM      Profile for Jim Schrader   Author's Homepage     Send New Private Message       Edit/Delete Post 
I just got done converting my tower 8mm projector to a new lamp from the DLS bulb total cost less than 15.00 and the bulbs are cheaper to replace.
-
-
I need 2 small screws for the lamp shield, if anybody has one of these units and it does not work or are thinking of tossing it out I could use those I will pay for shipping and if you want to charge me to thats fine, the screws about 4mm doubt that I can find these in the hardware store. tHere is also 1 that holds a cardboard shhield by the fan they aslo have small washers to.
-

--------------------
jim schrader
"Let's see “do I have that title already?"

 |  IP: Logged
Dino Everette
Phenomenal Film Handler

Posts: 1535
From: Long Beach, CA USA
Registered: Dec 2008

- posted February 02, 2015 01:07 AM      Profile for Dino Everette     Send New Private Message       Edit/Delete Post 
Jim, well done.... Can you get the little screws at Radio Shack or somewhere?

--------------------
"You're too Far Out Miss Lawrence"

 |  IP: Logged
Jim Schrader
Phenomenal Film Handler

Posts: 1628
From: Savage, MN, USA
Registered: Jun 2003

- posted February 02, 2015 09:06 AM      Profile for Jim Schrader   Author's Homepage     Send New Private Message       Edit/Delete Post 
I have not checked at radio shack that is a good idea thanks dino.

--------------------
jim schrader
"Let's see “do I have that title already?"

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2