8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Bauer Speaker connector plates break often. Solutions?

 - UBBFriend: Email this page to someone!    
Author Topic: Bauer Speaker connector plates break often. Solutions?
Edwin van Eck
Master Film Handler

Posts: 312
From: Tilburg, Netherlands
Registered: Feb 2015


 - posted November 15, 2017 07:45 AM      Profile for Edwin van Eck   Author's Homepage     Send New Private Message       Edit/Delete Post 
Hi,

We very frequently have issues with the messing plates in the Bauer studioline series (Bauer T502, T510, T610, etc, etc).
These tend to break when you open the back cover often (e.g. for maintenance).

Is this part available? Or does someone recommend a solution?
Anyone on this forum with similar problems?

 -

 -

--------------------
Edwin van Eck
Van Eck Video Services

 |  IP: Logged

David Roberts
Master Film Handler

Posts: 405
From: Suffolk. England
Registered: Apr 2004


 - posted November 15, 2017 11:58 AM      Profile for David Roberts     Send New Private Message       Edit/Delete Post 
hi Edwin,
these have come off the circuit board on mine,but have not broken as such,so ive just re-soldered them back on.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2