8mm Forum: Lomo cutter splitter

»	8mm Forum » 8mm Forum » Lomo cutter splitter

UBBFriend: Email this page to someone!

Author

Topic: Lomo cutter splitter

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted September 17, 2018 06:53 PM

I have this Lomo cutter for 2x8 film (photo taken from the internet).

Should I cut a developed DS8 film, do you know if it's all right also for it?
I have no DS8 don't cut for a trial.

| IP: Logged

Brian Fretwell
Phenomenal Film Handler

Posts: 1785
From: London, UK
Registered: Jun 2014

posted September 18, 2018 09:08 AM

It was sold with the Lomo developing tank for splitting home developed standard 8 film. the one I had was slightly inaccurate and one half was slightly wider than the other when slit.

| IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted September 18, 2018 09:59 AM

And would it be good for DS8 too?

| IP: Logged

Renzo Dal Bo
Film Handler

Posts: 70
From: Mogliano Veneto, Italy
Registered: Dec 2016

posted September 18, 2018 11:22 AM

I can confirm that it can be used to split DS8 films, if it properly works.

Renzo

| IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted September 18, 2018 11:51 AM

Thank you, Renzo.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2