8mm Forum: Keystone Projector Help

»	8mm Forum » 8mm Forum » Keystone Projector Help

UBBFriend: Email this page to someone!

Author

Topic: Keystone Projector Help

Brad Kimball
Phenomenal Film Handler

Posts: 1171
From: Highland Mills, NY USA
Registered: Jun 2003

posted August 04, 2019 10:38 AM

How does one open the back of a K-106? There are no screws to be found that I can see. A cunundrum.

| IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011

posted August 04, 2019 02:10 PM

Hi Brad. I am not familiar with that model projector, however sometimes removing the case is not that straightforward. Just a thought - Check the underside of the projector. I have seen in some projectors that you have to remove the feet to slide the casing off.

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

| IP: Logged

Richard C Patchett
Master Film Handler

Posts: 424
From: Flint Mi 48506
Registered: Dec 2007

posted August 04, 2019 03:16 PM

Greetings Brad
Its been a while since i work on one if im not mistaken there are small hex nuts on the front of the projector Remove them
Then lift out the front from the case
I hope this helps
RC

--------------------
RC’s Classic Collection
16 mm Parts & Service
Elmo, Eiki, Bell & Howell +
http://www.rcsclassic16mm.com/

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2