8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm equipment for sale/trade   » WANTED: Elmo sprocket/pulley for ST 1200 D or HD

 - UBBFriend: Email this page to someone!    
Author Topic: WANTED: Elmo sprocket/pulley for ST 1200 D or HD
John Capazzo
Master Film Handler

Posts: 421
From: Hillside, NJ USA
Registered: Jan 2004


 - posted March 15, 2017 09:09 PM      Profile for John Capazzo     Send New Private Message       Edit/Delete Post 
Does anyone have the pulley and sprocket that are behind the rear arm for an Elmo ST 1200 D, HD or the later ST 800? They engage when in REW mode and disengage when in FWD.One has two tiny allen screws to remove and the other behind it pulls out when the first one is removed.

Thanks,
John

--------------------
"the image is about 30 feet ahead of us."

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted March 15, 2017 09:23 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
Howdie John,

Do you mean that weird little cog that grabs the mating part only one way, but likes to develop cracks around the Allen screws?

Van-Eck New Part

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

John Capazzo
Master Film Handler

Posts: 421
From: Hillside, NJ USA
Registered: Jan 2004


 - posted March 16, 2017 05:35 AM      Profile for John Capazzo     Send New Private Message       Edit/Delete Post 
Hey Steve--yep, that's the one; and the one behind it, too.

--------------------
"the image is about 30 feet ahead of us."

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2