8mm Forum

my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Aux Out on a B&H TQII / 1655

 - UBBFriend: Email this page to someone!    
Author Topic: Aux Out on a B&H TQII / 1655
Clive Carmock
Film Handler

Posts: 69
From: London, UK
Registered: Feb 2005

 - posted September 02, 2012 10:19 AM      Profile for Clive Carmock   Email Clive Carmock   Send New Private Message       Edit/Delete Post 
Hi I'd like to add a line/aux out on my B&H TQII / 1655 16mm projector.

I was once told to take connections from either end of the Voume controls carbon track. I have tried this - signal from the top end and ground from the 0 end. It does work, but the line out at this point is very low level, and I have to have the external amplifier volume very high.

Is there a better place to obtain line level out from this machine?

 |  IP: Logged

Martin Jones
Phenomenal Film Handler

Posts: 1269
From: Thetford , Norfolk,England
Registered: May 2008

 - posted September 03, 2012 01:32 PM      Profile for Martin Jones     Send New Private Message       Edit/Delete Post 
In this model, the Volume control is fed directly from an Integrated Circuit Amplifier and there is NOWHERE prior to the Volume control where a better level signal can be obtained.
It is possible to take off a signal later in the amplifier, but its Level and Tone would be affected by the Volume, Treble and Bass controls.
If it is helpful to you, PM or Email me and I will send you a cct (schematic) diagram with suggestions.

Retired TV Service Engineer
Ongoing interest in Telecine....

 |  IP: Logged

All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation