8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » EIKI elf ST /01 wiring

 - UBBFriend: Email this page to someone!    
Author Topic: EIKI elf ST /01 wiring
Barry Webb
Film Handler

Posts: 79
From: Cornwall, England.UK
Registered: Jan 2010


 - posted October 19, 2015 01:47 PM      Profile for Barry Webb   Email Barry Webb   Send New Private Message       Edit/Delete Post 
Hi all I have just got hold of the elf and it needs a new power cable fitting but not sure where the wires go on the machine in block from the top the wires are red yellow brown and black . The earth cable is to the body so that's easy my problem is in the UK we have brown live and blue neutral and green earth just not sure where to put the live and neutral wires any ideas?

 |  IP: Logged

Barry Webb
Film Handler

Posts: 79
From: Cornwall, England.UK
Registered: Jan 2010


 - posted October 20, 2015 05:27 AM      Profile for Barry Webb   Email Barry Webb   Send New Private Message       Edit/Delete Post 
Up date I have now found a wiring diagram for the machine and all is working well.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2