8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » My first vinegar print :(...

 - UBBFriend: Email this page to someone!    
Author Topic: My first vinegar print :(...
Elyas Tesfaye
Jedi Master Film Handler

Posts: 520
From: Winnipeg, Manitoba, Canada
Registered: Nov 2012


 - posted November 13, 2015 04:15 PM      Profile for Elyas Tesfaye     Send New Private Message       Edit/Delete Post 
Hi all,

just came across my first print with VS. The one question I have is if there's a cure at all as I would love to save the print [Frown] ...

Cheers,
Elyas

 |  IP: Logged

Clinton Hunt
Jedi Master Film Handler

Posts: 845
From: Waharoa,North Island,New Zealand
Registered: May 2010


 - posted November 13, 2015 05:47 PM      Profile for Clinton Hunt   Author's Homepage     Send New Private Message       Edit/Delete Post 
Hi Elyas,
this topic comes up alot on the forum and even I've asked it ... there is no cure for VS but there are way to slow it down or mask the smell.Filmguard and other cleaners will lessen the smell but it will slowly get worse and then time to bin it!
I have a Chimps Jamboree 16mm B/W silent that was warped when I got it,however after a year or so I went to screen it and it now has VS and badly warped film! I've replaced it and binned that old copy.
Seems a waste but it's the only solution in the end as far as I know. [Frown]

--------------------
Cheers from me in New Zealand :-)

 |  IP: Logged

David Guest
Phenomenal Film Handler

Posts: 1704
From: Lancashire, UK
Registered: Oct 2011


 - posted November 13, 2015 07:10 PM      Profile for David Guest     Send New Private Message       Edit/Delete Post 
send it back or you could spray it with furniture polish that will take out the smell but will never get rid of it and will go worse ,maybe its time to bin it

 |  IP: Logged

Yanis Tzortzis
Jedi Master Film Handler

Posts: 531
From: Greece
Registered: Aug 2005


 - posted November 14, 2015 05:28 AM      Profile for Yanis Tzortzis   Author's Homepage   Email Yanis Tzortzis   Send New Private Message       Edit/Delete Post 
One question: I have a film affected & badly warped; I plan to run it through my projector to try & film it on screen with a camera so I can kind of 'digitise' & save it. It's fine for the projector--so won't affect other films I run through,no?

--------------------
Yannis

 |  IP: Logged

Mark Todd
Film God

Posts: 3846
From: UK
Registered: Aug 2003


 - posted November 14, 2015 09:19 AM      Profile for Mark Todd     Send New Private Message       Edit/Delete Post 
Personally if I wanted to run a vinegar print through a projector, I would make sure I never ran a good film through it afterwards and keep it just for those.

If it was me though, I`d send it back or ask for a refund and bung it in the bin, quick, quick.

Best Mark.

 |  IP: Logged

Bill Brandenstein
Phenomenal Film Handler

Posts: 1632
From: California
Registered: Aug 2007


 - posted November 18, 2015 12:43 PM      Profile for Bill Brandenstein   Email Bill Brandenstein   Send New Private Message       Edit/Delete Post 
With all due respect to other fine opinions, I have no issue with running VS prints through the same projector so long as the film path is cleaned and there's brief time elapsed so any miniscule residual acetic acid can air out. Unless it's a polyester print, in which case it doesn't matter at all.

 |  IP: Logged

Dave Groves
Jedi Master Film Handler

Posts: 508
From: Southend on Sea, Essex, UK
Registered: Feb 2015


 - posted November 19, 2015 02:47 PM      Profile for Dave Groves     Send New Private Message       Edit/Delete Post 
My print of 'Question 7' also has a very interesting smell!! But it runs perfectly and I've never worried about using the machine afterwards. There's usually a time gap so it has plenty of airing. It's great when you can replace an affected print but it's pretty devastating when no other copies are available or are similarly affected. What with fading colour, V.s. and shrinkage I'm beginning to feel twinges of the dreaded 'digital' coming on!!!. Now what's the antidote for that?

--------------------
Dave

 |  IP: Logged

Steven J Kirk
Jedi Master Film Handler

Posts: 873
From: Southern England
Registered: Apr 2008


 - posted November 27, 2015 04:41 PM      Profile for Steven J Kirk   Email Steven J Kirk   Send New Private Message       Edit/Delete Post 
So are we saying a good print can 'catch' VS by being the next film through the projector because I thought on other posts this had been ruled out?

--------------------
VistaVision
Motion Picture High-Fidelity

 |  IP: Logged

Clyde Miles
Expert Film Handler

Posts: 205
From: Bromsgrove, UK
Registered: Nov 2013


 - posted November 27, 2015 05:35 PM      Profile for Clyde Miles     Send New Private Message       Edit/Delete Post 
no!!!!

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2