8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Help with Kodak Pageant AV-126-TR Amp

 - UBBFriend: Email this page to someone!    
Author Topic: Help with Kodak Pageant AV-126-TR Amp
Patrick Curran
Junior
Posts: 1
From: Carrollton, TX, USA
Registered: Nov 2015


 - posted February 03, 2018 03:23 PM      Profile for Patrick Curran   Email Patrick Curran   Send New Private Message       Edit/Delete Post 
I was rebuilding the amp for my Kodak Pageant projector and I accidentally turned the 500k bias potentiometer thinking it was the volume control. I looked at the service manual for it, but it didn't give very specific instructions on how to make sure it's in adjustment or not. So far, I've just set the pot to the lowest setting using my multimeter, but I really don't know how far to set it from there.

--------------------
-Patrick

 |  IP: Logged

Matt Darr
Junior
Posts: 26
From: Little Rock, AR, USA
Registered: Jan 2018


 - posted February 03, 2018 05:07 PM      Profile for Matt Darr   Email Matt Darr   Send New Private Message       Edit/Delete Post 
I have the exact same projector and the exciter and maybe the amp doesnt work. NO sound anyway even after replacing the bulb.
If you Need any parts let me know. I've given up trying to fix this one.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2