8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm equipment for sale/trade   » Siemens 2000 projector: resistor wanted

 - UBBFriend: Email this page to someone!    
Author Topic: Siemens 2000 projector: resistor wanted
Phil Clarke
Junior
Posts: 26
From: London, United Kingdom
Registered: May 2014


 - posted February 16, 2016 01:08 PM      Profile for Phil Clarke   Email Phil Clarke   Send New Private Message       Edit/Delete Post 
Hello all

Siemens 2000 16mm Projector

I'm after a lamp resistor for this splendid machine. I need the 1000w 120v version. Does anyone have one for sale, if so please drop me a line.

Alternatively I gather that the resistors were also made available as a kit with various possible positions for fitting the spiral on the ceramic plug, depending on the required configuration. Does anyone have more info ?

thanking you
cheers
Phil

 |  IP: Logged

Thijs de Kort
Film Handler

Posts: 51
From: Tilburg, Netherlands
Registered: Jun 2015


 - posted February 17, 2016 02:36 AM      Profile for Thijs de Kort   Email Thijs de Kort   Send New Private Message       Edit/Delete Post 
If memory serves me correctly Edwin van Eck has these for sale.
He also has some other parts for these projectors for sale and the full information about them as well.
Here's a link to his website: http://www.van-eck.net/itable.php?lang=en&size=0&cat=film&merk=151&type=2000

 |  IP: Logged

Josef Grassmann
Expert Film Handler

Posts: 190
From: Hennef-Sieg, Germany
Registered: Apr 2005


 - posted March 03, 2016 01:00 PM      Profile for Josef Grassmann   Author's Homepage   Email Josef Grassmann   Send New Private Message       Edit/Delete Post 
the thick wire wounded resitor on top of ceramic body can easily be shorten by a piece of copper wire. Then you have converted lamp voltage for use with a 110V transformer.
The thin wire wounded resistor at bottom of ceramic body can be shorten in similar way. Siemens did employ here a small wire wounded resistor for softer regulation.
If required I could measure Ohm value, when I am back home.

Josef

PS: If you use original Siemens "Regelfix" adjustable transformer
with special 3 pole socket, we can supply special 3 pin plug to connect it to mains cord of projector.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2