8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 9.5mm Forum   » Pathescope Ace belt of motor

 - UBBFriend: Email this page to someone!    
Author Topic: Pathescope Ace belt of motor
Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013


 - posted November 21, 2018 02:55 PM      Profile for Luigi Castellitto   Email Luigi Castellitto   Send New Private Message       Edit/Delete Post 
As I said here:
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=10;t=000161
I look for motor belt of Pathescope Ace.
I could find one of the same size, but my belt is too deformed, I can't take the exact measurements: does anyone know them?
Maybe another projector, perhaps of the same Pathé, has the same belt, or maybe another model.
Thank you. [Smile]

 |  IP: Logged

Ken Finch
Jedi Master Film Handler

Posts: 543
From: Herne Bay, Kent. U.K.
Registered: Oct 2011


 - posted November 25, 2018 08:54 AM      Profile for Ken Finch   Email Ken Finch   Send New Private Message       Edit/Delete Post 
Ace motor belt diameter = 5" or 2.5 to 3cms. Ken Finch.

 |  IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013


 - posted November 25, 2018 06:13 PM      Profile for Luigi Castellitto   Email Luigi Castellitto   Send New Private Message       Edit/Delete Post 
Thanks, Ken. A few days ago I ordered a pair of o-rings (paid very little) of the right size. I noticed that the original Pathescope Ace motor belt was square form, but I don't think there are problems with the round ones.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2