8mm Forum: WANTED Heurtier Tri-Film Projector Parts

»	8mm Forum » 9.5mm for sale/trade/wanted » WANTED Heurtier Tri-Film Projector Parts

UBBFriend: Email this page to someone!

Author

Topic: WANTED Heurtier Tri-Film Projector Parts

Trevor Adams
Jedi Master Film Handler

Posts: 763
From: Auckland,New Zealand
Registered: Jun 2003

posted June 19, 2007 06:23 PM

I'm after the 9.5mm and 16mm gates. [Smile]

Trev

--------------------
Trevor

| IP: Logged

Lee Mannering
Film God

Posts: 3216
From: The Projection Box
Registered: Nov 2006

posted June 20, 2007 07:57 AM

Hell again Trev. I think I have spare gates in the parts archive somewhere. I could have a look for you if you wish...upon a star.

| IP: Logged

Trevor Adams
Jedi Master Film Handler

Posts: 763
From: Auckland,New Zealand
Registered: Jun 2003

posted June 21, 2007 03:42 PM

I'd certainly be obliged if you would have a look thanks Lee!Trev

--------------------
Trevor

| IP: Logged

David Kilderry
Jedi Master Film Handler

Posts: 963
From: Melbourne, Victoria, Australia
Registered: Feb 2006

posted June 24, 2009 10:15 PM

Mine stuck in 9.5, which is why I wanted one in the first place! The previous owner may be able to find the other gates however.

| IP: Logged

Trevor Adams
Jedi Master Film Handler

Posts: 763
From: Auckland,New Zealand
Registered: Jun 2003

posted June 25, 2009 11:07 PM

David,I didn't hear from Lee again [Wink]

Mine is 8mm.Incidently,it came with foreign(I think Ditmar) arms.I didn't know the originals were plastic until I read Mike's article.Trev

--------------------
Trevor

| IP: Logged

David Kilderry
Jedi Master Film Handler

Posts: 963
From: Melbourne, Victoria, Australia
Registered: Feb 2006

posted June 26, 2009 05:04 AM

Trevor, I am just about to read the article (been on the shelf all week waiting for a spare moment), but I did not know the arms were plastic, mine are not. I guess they did not survive the rigors of time.

I hear there is a NZ contingent coming over to our little swap meet here in Melbourne next month.

David

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2