8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Copying cine film

 - UBBFriend: Email this page to someone!    
Author Topic: Copying cine film
Colin Robert Hunt
Expert Film Handler

Posts: 226
From: Milton Keynes Buckinghamshire
Registered: Aug 2005


 - posted September 12, 2005 02:44 PM      Profile for Colin Robert Hunt   Author's Homepage   Email Colin Robert Hunt   Send New Private Message       Edit/Delete Post 
Just a general request on info on copying cine film to video camera. This thread was started on silent film through a simple copying device to a video camera. The question is how do we do this if the fim has sound? How do we connect for the sound? Any answers would be appreciated on this.

 |  IP: Logged

Winbert Hutahaean
Film God

Posts: 5468
From: Nouméa, New Caledonia
Registered: Jun 2003


 - posted September 12, 2005 04:20 PM      Profile for Winbert Hutahaean     Send New Private Message       Edit/Delete Post 
Collin,
It depends on what projector and camera are being used. Some projectors (mostly high end one) have an audio output jack, despite it uses the cannon output jack (the one like the earphone's).

As well as the video camera, they have audio input jack, but some brands put the cannon jack, some are with RCA (normal red and white audio jack).

So hook the output to the input jack...that's it!.

If you don't find the output jack in the projector, take the headphone output jack...it will do the same.

BUT Beware...don't ever take the sound from the speaker output and put to the video input jack! It is to big to be handled by your video camera.

Thanks,

--------------------
Winbert

 |  IP: Logged

Tim Christian
Expert Film Handler

Posts: 219
From: Norfolk, UK
Registered: Jun 2003


 - posted September 12, 2005 05:08 PM      Profile for Tim Christian   Author's Homepage     Send New Private Message       Edit/Delete Post 
For safe conversion of loudspeaker output to audio line input levels, see

this article.

--------------------
Tim

 |  IP: Logged

John Whittle
Jedi Master Film Handler

Posts: 791
From: Northridge, CA USA
Registered: Jun 2003


 - posted September 12, 2005 06:02 PM      Profile for John Whittle   Email John Whittle       Edit/Delete Post 
quote:
The question is how do we do this if the fim has sound?
It's also important to know where you are in the world since different video standards require different techniques. If you're in the US with NTSC you have to overcome the 24 fps film to 29.997 video frame rate. The simple way is with a five blade shutter, synch motor to get a suitable impulse rate to the camera.

If you live in a PAL country with 25 fps video rate, then a two blade shutter will give good results.

In any event, quality with be greatly increase if you go to an aaerial image (I haven't checked the above link, but it's probably discussed there).

John

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2