8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » BRAUN visacustic 2000 digital

 - UBBFriend: Email this page to someone!    
Author Topic: BRAUN visacustic 2000 digital
Robert Tucker
Jedi Master Film Handler

Posts: 688
From: Essex, UK
Registered: May 2005


 - posted January 20, 2009 02:55 AM      Profile for Robert Tucker     Send New Private Message       Edit/Delete Post 
Hopefully someone can help me on this, i have bought a replacement worm gear for a Braun Visacustic 2000 digital projector from Wittner that needs to be replaced. Can anyone tell me what tool i need to unscrew this from the shaft so that i can replace the worm gear with the new one?

I thought it would be a standard metric allen key fitting but have since found out it is completely round, so i am baffled in what i should do to get this off the shaft.

Thanks in advance!

 |  IP: Logged

Hans van der Sloot
Master Film Handler

Posts: 425
From: the Netherlands
Registered: Nov 2005


 - posted January 21, 2009 05:09 PM      Profile for Hans van der Sloot   Author's Homepage   Email Hans van der Sloot   Send New Private Message       Edit/Delete Post 
Robert, you need a 1.5mm hex key.
It is a bit of fiddling to get it unscrewed, especially when the screw got stuck because of age.
I got the Wittner worm gear too, but prefer the worm gear made by De Snek.

 |  IP: Logged

Robert Tucker
Jedi Master Film Handler

Posts: 688
From: Essex, UK
Registered: May 2005


 - posted January 22, 2009 04:13 AM      Profile for Robert Tucker     Send New Private Message       Edit/Delete Post 
Hi Hans,

Yes you could say it was a bit of a job but i finally removed the old worm gear, which broke into bits when i took it off last night. I have now fitted the new part, which i have also greased. All i need to do now is put the motor back and we should be in business.

Many thanks for your input and kind help as it's much appreciated.

 |  IP: Logged

Hans van der Sloot
Master Film Handler

Posts: 425
From: the Netherlands
Registered: Nov 2005


 - posted January 25, 2009 07:36 AM      Profile for Hans van der Sloot   Author's Homepage   Email Hans van der Sloot   Send New Private Message       Edit/Delete Post 
You're welcome.

My old wormgear fel apart too when I removed it.
Even when the wormgear has an almost invisible crack, the projector will run unevenly.
With a good wormgear, the Visacustic is surely one of my favorite projectors.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2