8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » How on Earth...Eumig 610

 - UBBFriend: Email this page to someone!    
Author Topic: How on Earth...Eumig 610
Jon Addams
Jedi Master Film Handler

Posts: 638
From: New York, NY, USA
Registered: Apr 2007


 - posted April 03, 2010 02:43 PM      Profile for Jon Addams     Send New Private Message       Edit/Delete Post 
How on earth can you change the motor belt on an Eumig 610D without taking the whole machine apart?

Thanks

Jon

 |  IP: Logged

Douglas Meltzer
Moderator

Posts: 4554
From: New York, NY, USA
Registered: Jun 2003


 - posted April 03, 2010 04:03 PM      Profile for Douglas Meltzer   Email Douglas Meltzer   Send New Private Message       Edit/Delete Post 
Jon,

According to the manual:

 -

Doug

--------------------
I think there's room for just one more film.....

 |  IP: Logged

Jon Addams
Jedi Master Film Handler

Posts: 638
From: New York, NY, USA
Registered: Apr 2007


 - posted April 03, 2010 09:45 PM      Profile for Jon Addams     Send New Private Message       Edit/Delete Post 
Hello Doug,

I didn't have the manual.

Thank you for the drawing and instructions. Looking at the drawing and reading the instructions it appears simpler than putting one foot in front of the other when walking. However, in actuality it’s a heck of a chore, it’s almost impossible to get the belt in place as there’s literally no space to feed it at the top.

I changed the belt all right but I still think it may have been easier by taking the machine apart. [Big Grin] [Big Grin] WOW!!!

Thanks again,

Jon

 |  IP: Logged

Douglas Meltzer
Moderator

Posts: 4554
From: New York, NY, USA
Registered: Jun 2003


 - posted April 03, 2010 10:11 PM      Profile for Douglas Meltzer   Email Douglas Meltzer   Send New Private Message       Edit/Delete Post 
Jon,

Sorry it was so tough, but I'm glad it worked out. I've e-mailed you the manual.

Doug

--------------------
I think there's room for just one more film.....

 |  IP: Logged

Jon Addams
Jedi Master Film Handler

Posts: 638
From: New York, NY, USA
Registered: Apr 2007


 - posted April 04, 2010 12:10 AM      Profile for Jon Addams     Send New Private Message       Edit/Delete Post 
Thanks for the manual Doug, it's one of the few I didn't have.

Regards,

Jon

 |  IP: Logged

Mikael Barnard
Film Handler

Posts: 85
From: Leighton Buzzard, Bedfordshire, UK
Registered: Jun 2009


 - posted April 04, 2010 07:00 PM      Profile for Mikael Barnard   Email Mikael Barnard   Send New Private Message       Edit/Delete Post 
This is the main reasons I HATE 610Ds, that belt is such a PIG to change!

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2