8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » 8mm to digital

 - UBBFriend: Email this page to someone!    
Author Topic: 8mm to digital
Claudio Corsi
Junior
Posts: 1
From: Sudbury, Ontario, Canada
Registered: Apr 2010


 - posted April 14, 2010 02:15 PM      Profile for Claudio Corsi   Email Claudio Corsi   Send New Private Message       Edit/Delete Post 
I'm in the process of transferring some old 8mm home movies to digital, I've built a rig to essentially take a high res image of each frame of the film, which I then reassemble into a video.

The main issue is that the film does have some scratching, I know that there are products ( filmguard ) and devices to handle that situation under normal circumstances. The question is if I have a mechanism to clean the film before it enters my rig will the cleaning fluid survive (not evaporate?) until it enters the machine. Keeping in mind the rig runs at about 1 frame every 4 or 5 seconds. Any suggestions would be welcome.

Claudio

Here is a sample frame

 -

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2