Posts: 823
From: The Netherlands
Registered: Mar 2008
posted February 17, 2012 03:31 PM
Hello people,
i can't record on track 2 anymore,does anyone know what is happen with the magnetic stripe because other movies works everything.if i listen then i hear little beeps like slipping. i have clean the movie but is that the problem? I don't know what to do.....helppppp!!!!
-------------------- Super8 that's the greatest hobby in my life,i was 9 to have my first viewer from GAF.
posted February 18, 2012 04:05 AM
Hopefully it's just that one print. Try another one and if that's okay then it confirms the problem, if not then the projector is at fault.
I had this problem with my first Aliens feature (Kodak pre-stripe) where the Chinon SS1200 was not applying pressure to the right place on this one print. I made a paper washer for the sound pressure guide and miraculously that cured it. As you can imagine, the subsequent re-recording was very good.
-------------------- British Film Collectors Convention home page www.bfcc.biz. The site is for the whole of the film collecting hobby and not just the BFCC.
posted February 19, 2012 07:34 AM
Another projector may record it okay. Nothing can be done about the print, there's actually nothing wrong with it, it's just your projector doesn't line up. Re-record it in mono on the main track or sync' pulse it if you have a GS1200 in your collection.
-------------------- British Film Collectors Convention home page www.bfcc.biz. The site is for the whole of the film collecting hobby and not just the BFCC.