8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Protecting Films During A Move

 - UBBFriend: Email this page to someone!    
Author Topic: Protecting Films During A Move
Scott Mallory
Expert Film Handler

Posts: 146
From: Montreal, QC
Registered: Jan 2011


 - posted May 09, 2012 01:31 AM      Profile for Scott Mallory   Author's Homepage     Send New Private Message       Edit/Delete Post 
This summer I'm moving from the very hot and humid Southern Indiana (almost Kentucky) to Montreal. It's a pretty long haul in a hot moving truck and I'm worried how I'll protect my film collection. Any ideas on the best way to pack and protect the films? Thanks, Scott

--------------------
Scott

 |  IP: Logged

Winbert Hutahaean
Film God

Posts: 5468
From: Nouméa, New Caledonia
Registered: Jun 2003


 - posted May 09, 2012 05:47 AM      Profile for Winbert Hutahaean     Send New Private Message       Edit/Delete Post 
I one moved from Fiji, a humid country too, to Indonesia, a much humid ones and my films was moved with 20' container. It took 2 months for container to arrive..... And nothing happen to all my films.

I don't think high temperature in very short time wil harm your films as long as you do not directly expose them to the heat source (sunlight).

My 2 cents

--------------------
Winbert

 |  IP: Logged

Hugh Thompson Scott
Film God

Posts: 3063
From: Gt. Clifton,Cumbria,England
Registered: Jan 2012


 - posted May 09, 2012 01:48 PM      Profile for Hugh Thompson Scott   Email Hugh Thompson Scott       Edit/Delete Post 
Hello Scott,thats sound advice from Winbert.All I could suggest
if you are really apprehensive,would be to make sure that they
are packed securely,and all loose ends of film taped down in their
boxes.Depending on the size of your collection,perhaps the use
of those "freezer packs" that are used in picnic cooler boxes might
offset some of the temperature.The b/w prints should be okay,it's
just your colour film that need special attention.Although as
Winbert said,his films were alright and he's been through it.

 |  IP: Logged

Greg Marshall
Jedi Master Film Handler

Posts: 612
From: Nashville, TN USA
Registered: Sep 2008


 - posted May 09, 2012 07:31 PM      Profile for Greg Marshall     Send New Private Message       Edit/Delete Post 
Hey Scott.... didn't know you were that close to Nashville. Is the move permanent, or just for the summer?

 |  IP: Logged

Scott Mallory
Expert Film Handler

Posts: 146
From: Montreal, QC
Registered: Jan 2011


 - posted May 10, 2012 01:03 AM      Profile for Scott Mallory   Author's Homepage     Send New Private Message       Edit/Delete Post 
Thanks guys, I have OCD about my films as it is, and I'd hate for the move to trash the collection. I'll just go above and beyond packing the films and projectors. I recently also got 5 old theater seats from the 50s. Beautiful hardwood backs and iron frames. Hopefully they won't get tossed around too bad either, lol. And Greg, we're going to be there for 3 years! Target is launching a chain of stores in Canada and my wife is part of the effort. Should be quite an adventure. I hope there's film groups and conventions there.

--------------------
Scott

 |  IP: Logged

Akshay Nanjangud
Jedi Master Film Handler

Posts: 637
From: Dallas, TX
Registered: Nov 2011


 - posted May 10, 2012 01:42 AM      Profile for Akshay Nanjangud   Email Akshay Nanjangud   Send New Private Message       Edit/Delete Post 
Scott, I can lighten your burden. Since shorts are lighter, you could move those quite easily. I see features being the main problem. With this logic in place, I suggest you media mail your choice features to me! [Big Grin]

 |  IP: Logged

Lee Mannering
Film God

Posts: 3216
From: The Projection Box
Registered: Nov 2006


 - posted May 10, 2012 05:05 AM      Profile for Lee Mannering     Send New Private Message       Edit/Delete Post 
Might sound a bit over the top but I lined storage cupboards with foil to help maintain a cool temperature.

 |  IP: Logged

Winbert Hutahaean
Film God

Posts: 5468
From: Nouméa, New Caledonia
Registered: Jun 2003


 - posted May 10, 2012 09:15 AM      Profile for Winbert Hutahaean     Send New Private Message       Edit/Delete Post 
Scott,

You are transporting print film not fresh films, so temperature is not that issue, as long as it not extreme. I can say it is like you are transporting color posters. If you put a poster into direct sunlight of course it is going to get color fade, otherwise it will be fine.

Just for your peace of mind, during the 35mm era, print films were packed inside cans and distributed around the world by wood pallet. They arrived no wrong in cinemas.

As I am in Canada, I can assure you that Montreal is the best place for film group, as many Canadian movies are made in Montreal (Quebec). But those groups more to film makers/shooters not collectors like us.

I have been here in Canada for 3 years but don't really see movie collectors. Most projectors I have found is the most common Bell & Howell.

cheers,

--------------------
Winbert

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted May 10, 2012 01:02 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
I saw the title and for a second I thought it said "Projecting Films During A Move"

I thought "Well, if you stayed in a hotel room with white walls..."

-but seriously folks:

I'd be just as concerned about the projectors. Especially the ones in operating shape I'd want to keep in my own custody rather than tossed around by movers.

If you are doing a move where they pack your car in the van, inside the car would probably be the most shock free environment. Ditto If you are driving it yourself, just be prepared to negotiate this with the rest of the occupants.

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Hugh Thompson Scott
Film God

Posts: 3063
From: Gt. Clifton,Cumbria,England
Registered: Jan 2012


 - posted May 10, 2012 02:40 PM      Profile for Hugh Thompson Scott   Email Hugh Thompson Scott       Edit/Delete Post 
I like the "projecting during a move" Steve,it conjures up this
vision of silhouettes on the screen of removal men carting Scott's
furniture to the truck.

 |  IP: Logged

Dino Everette
Phenomenal Film Handler

Posts: 1535
From: Long Beach, CA USA
Registered: Dec 2008


 - posted May 10, 2012 06:53 PM      Profile for Dino Everette     Send New Private Message       Edit/Delete Post 
Scott, yes I would simply make sure you pack them in moving boxes with absolutely no chance for movement within the box, so they won't shift around, but you will be safe...I have drive a van filled with nitrate across states with no problems...The temp is not going to have a chance to have much of an effect on them for such a short move unless it was an open bed truck or something...But in a moving truck it may get warm, but not enough to cause damage...YOUR PROJECTORS on the other hand could get destroyed, so I would say pack them in a box, and then put that box into a bigger box filled with popcorn, or foam or something soft and protective, other wise you may be sorry.

--------------------
"You're too Far Out Miss Lawrence"

 |  IP: Logged

Scott Mallory
Expert Film Handler

Posts: 146
From: Montreal, QC
Registered: Jan 2011


 - posted May 10, 2012 11:54 PM      Profile for Scott Mallory   Author's Homepage     Send New Private Message       Edit/Delete Post 
Wow, thanks guys for all the great suggestions and your generous offer Akshay, lol. Yes I will super-pack the projectors and that's a good idea about putting them in the car. Wife and kids are flying, but I have to carpool with an old German Shepherd that would not do good on a flight. It's going to be a long drive! Winbert, I was excited about Montreal because they have a theater that shows 16mm prints, which I also collect, but they just announced they're shutting their doors for good in a couple of weeks. Maybe a new theater effort or group will come out of it?

--------------------
Scott

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2