8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » QUESTIONS excited found Eumig don’t know what I have yet

 - UBBFriend: Email this page to someone!    
Author Topic: QUESTIONS excited found Eumig don’t know what I have yet
Gerry Groeber
Junior
Posts: 22
From: Mesa,Arizona,USA
Registered: Jun 2012


 - posted July 28, 2012 04:10 PM      Profile for Gerry Groeber   Email Gerry Groeber   Send New Private Message       Edit/Delete Post 
Just found a Eumig 822 sounoMatic, super8, songle8, standard8 projector at a second hand store for $25.00.

new questions
Got the bulb working sanded the contacts and it worked. Now I have some questions.
There are two speeds 24 and 18 which is 8mm and which is super8
And where do you set the projector for 8mm and super 8mm the teeth are side by side.
and the big problem I can’t get it to track

[ July 28, 2012, 07:54 PM: Message edited by: Gerry Groeber ]

--------------------
Can’t wait to show some movies:)

 |  IP: Logged

Hugh Thompson Scott
Film God

Posts: 3063
From: Gt. Clifton,Cumbria,England
Registered: Jan 2012


 - posted July 28, 2012 04:31 PM      Profile for Hugh Thompson Scott   Email Hugh Thompson Scott       Edit/Delete Post 
Congratulations Gerry,careful of the furnishings when you're
doing the cartwheels.

 |  IP: Logged

Gerry Groeber
Junior
Posts: 22
From: Mesa,Arizona,USA
Registered: Jun 2012


 - posted July 28, 2012 04:34 PM      Profile for Gerry Groeber   Email Gerry Groeber   Send New Private Message       Edit/Delete Post 
Sweet so this is a good projector. I have some bell and howell projectors but this is my first Eumig.
Tell me all about it.
Are the holes in the back for speaker output.
what does the record feature do.
I do need a bulb 100W 12V

--------------------
Can’t wait to show some movies:)

 |  IP: Logged

Joe Balitzki
Jedi Master Film Handler

Posts: 529
From: Charleston, SC, USA
Registered: Aug 2005


 - posted July 28, 2012 04:56 PM      Profile for Joe Balitzki   Email Joe Balitzki   Send New Private Message       Edit/Delete Post 
Did the bulb burn out on you or was it burnt out when you bought it? If it was burnt out when you bought it, get a bulb to test the machine and if it lights, then do some more cartwheels cause we enjoy the show! [Smile]

--------------------
Movie Lovers Do It in the Dark

 |  IP: Logged

Gerry Groeber
Junior
Posts: 22
From: Mesa,Arizona,USA
Registered: Jun 2012


 - posted July 28, 2012 05:05 PM      Profile for Gerry Groeber   Email Gerry Groeber   Send New Private Message       Edit/Delete Post 
Bulb was burnt when I bought it. Unless there is a switch just for the light. I found some bulbs on line. Is this bulb carried at electronic stores? I will post it on my blog www.vintage8mm.blogspot.com when I get some pictures and some video…

--------------------
Can’t wait to show some movies:)

 |  IP: Logged

Zechariah Sporre
Jedi Master Film Handler

Posts: 557
From: Ladysmith, WI U.S.A.
Registered: Dec 2010


 - posted July 28, 2012 05:28 PM      Profile for Zechariah Sporre     Send New Private Message       Edit/Delete Post 
What a nice find!!! I have the 824 and it is a great projector.

--------------------
There is a fine line between a hobby and a mental illness

 |  IP: Logged

Hugh Thompson Scott
Film God

Posts: 3063
From: Gt. Clifton,Cumbria,England
Registered: Jan 2012


 - posted July 28, 2012 05:50 PM      Profile for Hugh Thompson Scott   Email Hugh Thompson Scott       Edit/Delete Post 
Gerry,don't be pushing any buttons,especially red ones or you could wipe the sound on any film you might have loaded at the time.

 |  IP: Logged

Gerry Groeber
Junior
Posts: 22
From: Mesa,Arizona,USA
Registered: Jun 2012


 - posted July 28, 2012 06:50 PM      Profile for Gerry Groeber   Email Gerry Groeber   Send New Private Message       Edit/Delete Post 
Got the bulb working sanded the contacts and it worked. Now I have some questions.
There are two speeds 24 and 18 which is 8mm and which is super8
And where do you set the projector for 8mm and super 8mm the teeth are side by side.

--------------------
Can’t wait to show some movies:)

 |  IP: Logged

Paul Adsett
Film God

Posts: 5003
From: USA
Registered: Jun 2003


 - posted July 28, 2012 08:11 PM      Profile for Paul Adsett     Send New Private Message       Edit/Delete Post 
You set the speed at 24fps for all sound film prints, and 18fps for most silent film prints or home movie films.
Do NOT move the speed selector while the projector mechanism is engaged and running. Only move the speed selctor when the motor is idling.
The large teeth sprockets are for regular/standard 8mm film.
The small teeth sprockets are for super 8 film.

--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj

 |  IP: Logged

Gerry Groeber
Junior
Posts: 22
From: Mesa,Arizona,USA
Registered: Jun 2012


 - posted July 28, 2012 09:43 PM      Profile for Gerry Groeber   Email Gerry Groeber   Send New Private Message       Edit/Delete Post 
Thanks all, I figured it out. Is has removable sprockets for super8 and reg 8
And a separate film guide for reg 8 and super 8 once I converted it over to reg 8 it works great. Now I need some super 8 sound movies.

--------------------
Can’t wait to show some movies:)

 |  IP: Logged

Kenneth DePriest Jr
Film Handler

Posts: 64
From: severn MD
Registered: Aug 2012


 - posted August 09, 2012 08:45 PM      Profile for Kenneth DePriest Jr   Email Kenneth DePriest Jr   Send New Private Message       Edit/Delete Post 
about that "sanding the contacts" thing isnt it a spring that needs to be replaced? Eumigs have that "running too slow problem when they age and I knew a guy that used to replace a spring on the inside and it corrected the problem.

 |  IP: Logged

Dino Everette
Phenomenal Film Handler

Posts: 1535
From: Long Beach, CA USA
Registered: Dec 2008


 - posted August 10, 2012 12:00 AM      Profile for Dino Everette     Send New Private Message       Edit/Delete Post 
Kenneth, the 800 series Eumigs have the speed "wheel" that gets some smooth spots and some members have found that making the wheel slightly rough again will help regulate the speed.... [Smile]

--------------------
"You're too Far Out Miss Lawrence"

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2