Posts: 1535
From: Long Beach, CA USA
Registered: Dec 2008
posted August 21, 2012 11:56 PM
not as familiar with Gaf but weak rewind is usually one of three things 1 - belt issue 2 - broken/defective gear 3 - loose tension spring.
You should open up the projector and figure out which one it is.
-------------------- "You're too Far Out Miss Lawrence"
Posts: 534
From: Gold Coast. Australia
Registered: Jan 2005
posted August 22, 2012 10:26 AM
On some Gaf projectors, and also Chinon, Sankyo Sound 501, 700 etc, weak rewind can be a symptom of a weak reverse/rewind friction clutch. The clutch is a part of a swinging plastic gear assembly that drives the front spindle when you select rewind or reverse project.
Should read around 330 cm/gm torque at the spindle when rewinding at 24fps.
[ August 23, 2012, 04:01 AM: Message edited by: frank arnstein ]
-------------------- At Projector Heaven the Focus is always on Detail.