8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Metal 1200ft Reel for Elmo

- UBBFriend: Email this page to someone!    
Author Topic: Metal 1200ft Reel for Elmo
Tom Dee
Film Handler

Posts: 62
From: Phoenix AZ, USA
Registered: Oct 2014

- posted February 10, 2015 04:50 PM      Profile for Tom Dee   Email Tom Dee   Send New Private Message       Edit/Delete Post 
I have just purchased a metal / stainless steel 1200ft reel for my elmo ST1200, when I tried to put the new reel on the arm it would not fit.. seems like the inner of the 1200 reel is to small for the outer of the spindle for the ST. It looks like the inner could be replace with a bigger hole to fit on the ST. Would I be right thinking this...and if so where would I get a new inner. Any info on this would be much appreciated.

Thanks
Tom

 |  IP: Logged
Dominique De Bast
Film God

Posts: 4486
From: Brussels, Belgium
Registered: Jun 2013

- posted February 10, 2015 05:09 PM      Profile for Dominique De Bast   Email Dominique De Bast   Send New Private Message       Edit/Delete Post 
I've had the same problem with some large metallic spools. The only solution I found was to use a file.

--------------------
Dominique

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2