8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Da-Lite Projector Stand

 - UBBFriend: Email this page to someone!    
Author Topic: Da-Lite Projector Stand
Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011


 - posted March 05, 2015 12:54 AM      Profile for Janice Glesser     Send New Private Message       Edit/Delete Post 
I have been using two Logan Show King projector tables in my screening room and they have worked great. I especially like the built-in outlets and the lamp switch. However they are not great on stability and I wanted something taller.

 -

I Just replaced the tables with this Da-Lite Projector Stand. The height is adjustable and it is very stable. I can fit 2 projector on it. I currently have an Elmo 16CL and a B&H 33SR playing nicely on it. There's plenty of room to thread, rewind, and adjust volume on both machines and I can do everything standing.

 -

I was a bit concerned that projecting to my screen from a higher angle would create key-stoning. It's not a typical screen. It was made for a Sony projection TV back in the 80's. I got rid of the TV, but kept the screen. This screen is made to have the projection come from a low angle pointing up to the screen and with the Da-lite stand I'm projecting more straight on. There is some minor fading at the bottom because of the curvature and angle of the screen , but over-all very acceptable.

 -

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

 |  IP: Logged

Dominique De Bast
Film God

Posts: 4486
From: Brussels, Belgium
Registered: Jun 2013


 - posted March 05, 2015 01:30 AM      Profile for Dominique De Bast   Email Dominique De Bast   Send New Private Message       Edit/Delete Post 
Impressive pictures !

--------------------
Dominique

 |  IP: Logged

Graham Ritchie
Film God

Posts: 4001
From: New Zealand
Registered: Feb 2006


 - posted March 05, 2015 10:35 PM      Profile for Graham Ritchie   Email Graham Ritchie   Send New Private Message       Edit/Delete Post 
Looks good Janice, but are those adjustable telescopic legs?...the reason I mention this, if that's the case, you would have to be very careful to make sure they are locked very tight, so there is no chance those telescopic legs slipping under the weight of the projectors.

 |  IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011


 - posted March 06, 2015 01:08 AM      Profile for Janice Glesser     Send New Private Message       Edit/Delete Post 
Graham...yes the legs telescope. I appreciate your concern. I will check the legs again to make sure they are turned tight enough [Smile]

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2