I have inherited a Chinon C300 projector which seems to have a problem with the light.
I have changed the bulb and tested the connection with a multi meter There seems to be current flowing at the connection but bulb doesn't light up. I have tried 3 new bulbs.
Could it be an issue with the quality of the current?
Has anyone else had a similar issue with a projector?
Posts: 506
From: Shrewsbury, Shropshire, UK
Registered: Mar 2016
posted April 03, 2016 12:29 PM
It could be a poor connection to the lamp socket. The terminals in the socket could be tarnished etc causing electrical resistance. A 100 watt lamp will draw a far greater current than a multi-meter.
Posts: 506
From: Shrewsbury, Shropshire, UK
Registered: Mar 2016
posted April 03, 2016 12:29 PM
It could be a poor connection to the lamp socket. The terminals in the socket could be tarnished etc causing electrical resistance. A 100 watt lamp will draw a far greater current than a multi-meter.