8mm Forum: Kodak Moviedeck 475 Repair Help

»	8mm Forum » 8mm Forum » Kodak Moviedeck 475 Repair Help

UBBFriend: Email this page to someone!

Author

Topic: Kodak Moviedeck 475 Repair Help

Jerry Coleman
Junior
Posts: 4
From: Youngstown, OH, USA
Registered: Mar 2011

posted May 21, 2016 02:32 PM

I am about to attempt to get inside this unit for cleaning and repairing. I see I need a 'thin wall' hex head nut driver for 4 screws on the case (any special brand recommended)? Any other specialized tools needed? Does this model have a rubber drive belt? Any other advice on opening this up etc. and working inside would very much be appreciated.

Thanks,
Jerry

| IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011

posted May 21, 2016 03:30 PM

You can remove those screws with a standard 1/4" hex driver. If you would like a service manual...PM me with your email address and I'll send you a PDF.

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2