8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Threading not working anymore on Kodak M66

 - UBBFriend: Email this page to someone!    
Author Topic: Threading not working anymore on Kodak M66
Lutz Geiger
Junior
Posts: 1
From: Heilbronn, BW, Germany
Registered: May 2016


 - posted May 25, 2016 12:29 PM      Profile for Lutz Geiger   Email Lutz Geiger   Send New Private Message       Edit/Delete Post 
Hi All,

I hope you can help me. As of yesterday the threading of the film does not work anymore. I tried a few things to to no avail. Rewinding the reel works just fine but the film won't get pulled in anymore. I recorded two videos (upright as it was easier to film [Smile] and I suspect the two PINs that hold the preforation does not pull down the film anymore. Any ideas what could be the issue?

Slo-Mo of PINs not moving the film down but only forward

Motor view

Thanks All!

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2