|
Author
|
Topic: Yelco
|
Lynn Emerich
Junior
Posts: 5
From: Bernville, PA, USA
Registered: Jul 2016
|
posted August 01, 2016 06:22 PM
I got to this site while searching for new belts for my Yelco projector. I bought this from Pete Ellington at Matrix Video many years ago. I got an extra set of belts at the time and have used both of them. About 2 years ago, in the middle of a project, and a holiday weekend, the small belt broke. I went to a nearby auto parts store and asked the clerk if he had a O ring that size. A perfect fit and it's been running fine since then.
While searching, I ran across a post from someone named John who said he had instructions for changing the belts, but I lost the link. Before I retired, I spent 35 years "fixing" things, so I didn't have a big problem with the belts - it does take time. My large belt is starting to stretch out. It still runs fine, but one of these days I see a trip back to NAPA, unless I'm lucky enough to find one.
--------------------
Lynn
| IP: Logged
|
|
|
|
|
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
