8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Eumig 900 series switch

 - UBBFriend: Email this page to someone!    
Author Topic: Eumig 900 series switch
Paul Adsett
Film God

Posts: 5003
From: USA
Registered: Jun 2003


 - posted September 15, 2016 02:57 PM      Profile for Paul Adsett     Send New Private Message       Edit/Delete Post 
Yesterday was a wet day, so I finally got around to installing a new rocker switch in my Eumig 938. This rocker switch switches the main power on and off, and replaces the really nasty sliding mains switch, which for me has failed on every 900 series projector that I have owned.
To install the switch I had to drill an 11/16 hole through the metal back wall of the chassis, and re-route the power wires over the top of the motor. I installed a power strip to make things easier next time.

 -

 -

--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2