8mm Forum: Pallas/Tacnon Sound 808 belt changing ...

»	8mm Forum » 8mm Forum » Pallas/Tacnon Sound 808 belt changing ...

UBBFriend: Email this page to someone!

Author

Topic: Pallas/Tacnon Sound 808 belt changing ...

Clinton Hunt
Jedi Master Film Handler

Posts: 845
From: Waharoa,North Island,New Zealand
Registered: May 2010

posted June 04, 2016 12:56 AM

Hi all,
I have a Tacnon (or maybe called a Pallas overseas) Sound 808 Super 8mm that is in perfect condition but the belts have turned to goo.
How do I replace the belts, the small one from the motor is easy but the large one that runs the spools looks hard to get too?
Anyone got a manual that shows this type of job?
Cheers,
Clinton

--------------------
Cheers from me in New Zealand :-)

| IP: Logged

Clinton Hunt
Jedi Master Film Handler

Posts: 845
From: Waharoa,North Island,New Zealand
Registered: May 2010

posted December 17, 2016 05:46 PM

Well since I had success with a belt change on a Sankyo dualux 2000H,thanks to Janice and posting in this forum,I'm ready to re-visit this one,but this needs 2 belts!
I will post some pics soon and hopefully the "world" of forum members will guide me [Smile]

It's called a Pallas Soundmatic 808 as well as Tacnon Sound 808 in different countries [Smile]

--------------------
Cheers from me in New Zealand :-)

| IP: Logged

Clinton Hunt
Jedi Master Film Handler

Posts: 845
From: Waharoa,North Island,New Zealand
Registered: May 2010

posted December 26, 2016 11:24 PM

In the end it was easy to put the belt on,simply goes from left hand pulley and straight across to right hand pulley [Smile]

--------------------
Cheers from me in New Zealand :-)

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2