8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Getting a Super 8 Print made

 - UBBFriend: Email this page to someone!    
Author Topic: Getting a Super 8 Print made
Greg May
Film Handler

Posts: 52
From: Philadelphia, PA
Registered: Jan 2018


 - posted September 26, 2019 10:51 AM      Profile for Greg May     Send New Private Message       Edit/Delete Post 
I'm almost positive that someone has had to have brought this up before, but if I was to want a short film transferred on to Super 8, what would be the best way to go about it?

Thanks!

--------------------
16MM: EIKI SNT-0, EIKI NT-0
8MM: ELMO ST-600M

 |  IP: Logged

Brian Fretwell
Phenomenal Film Handler

Posts: 1785
From: London, UK
Registered: Jun 2014


 - posted September 26, 2019 11:02 AM      Profile for Brian Fretwell   Email Brian Fretwell   Send New Private Message       Edit/Delete Post 
I can' say, but it would help others if you put what format the film is on now.

 |  IP: Logged

Adrian Winchester
Film God

Posts: 2941
From: Croydon, London, UK
Registered: Aug 2004


 - posted September 26, 2019 11:03 AM      Profile for Adrian Winchester     Send New Private Message       Edit/Delete Post 
You haven't mentioned what you have in terms of gauge and whether it's a positive/negative, but unless anyone has information I'm aware of, I'm afraid your ONLY option is to see if the Andec lab in Germany can assist. Depending on your master, they probably can, but be prepared for a print to cost a substantial sum!

--------------------
Adrian Winchester

 |  IP: Logged

Greg May
Film Handler

Posts: 52
From: Philadelphia, PA
Registered: Jan 2018


 - posted September 26, 2019 11:05 AM      Profile for Greg May     Send New Private Message       Edit/Delete Post 
Sorry I should of been more clear. It would be in a digital format and I would want a Super 8 print printed from the source file.

--------------------
16MM: EIKI SNT-0, EIKI NT-0
8MM: ELMO ST-600M

 |  IP: Logged

Adrian Winchester
Film God

Posts: 2941
From: Croydon, London, UK
Registered: Aug 2004


 - posted September 26, 2019 11:13 AM      Profile for Adrian Winchester     Send New Private Message       Edit/Delete Post 
I think Andec should be able to manage that, but you should find details on their website. In fact a chap in Italy could probably supply a 16mm print for far lower cost, if that would be equally good from your point of view!

--------------------
Adrian Winchester

 |  IP: Logged

Greg May
Film Handler

Posts: 52
From: Philadelphia, PA
Registered: Jan 2018


 - posted September 26, 2019 11:21 AM      Profile for Greg May     Send New Private Message       Edit/Delete Post 
Great thanks! I sent an email to them to see what the rate would be.

--------------------
16MM: EIKI SNT-0, EIKI NT-0
8MM: ELMO ST-600M

 |  IP: Logged

Leonard Goss
Film Handler

Posts: 33
From: Launceston, Cornwall, UK.
Registered: Jul 2012


 - posted September 27, 2019 05:49 AM      Profile for Leonard Goss     Send New Private Message       Edit/Delete Post 
You could always try filming it on your camera direct from your computer screen, the quality would not be as good admittedly with possible strobing etc. but it may be worth a go just for fun.

--------------------
A fan of 8mm movies since the mid 1960s and still as keen as ever!

 |  IP: Logged

Nantawat Kittiwarakul
Master Film Handler

Posts: 280
From: Rajburana, Bangkok, Thailand
Registered: Aug 2017


 - posted September 27, 2019 10:34 PM      Profile for Nantawat Kittiwarakul   Email Nantawat Kittiwarakul   Send New Private Message       Edit/Delete Post 
Extending from Leonard's idea. If your short film is...
- Really short, just less than 3 minutes (to fit well within 50ft film's limit)
- No audio required (or you intend to dub it later anyway)
- You need only ONE copy, and one copy ONLY.
- And finally, you happen to have a Super 8 camera with reflex viewfinder&stop motion function.

You may, in theory, play your short film FRAME BY FRAME on high quality monitor (in dimly lit room, no reflection on the screen of course) and use the animation function on the camera to capture each frame shown on the screen.

This setup should be relatively low-cost compared to sending it to professional lab to do this film-out. Only drawback is that about 3,600 shutter press is required for this process. [Big Grin]

For a one-time work this should be just bearable. Anything beyond that, you may have to consider "automate" the process somewhat. [Wink]

--------------------
Just a lone collector from a faraway land...

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2