8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Revere 85 - troubleshooting

- UBBFriend: Email this page to someone!    
Author Topic: Revere 85 - troubleshooting
Andrew Wax
Junior
Posts: 1
From: Briarcliff Manor, NY, USA
Registered: Apr 2017

- posted April 19, 2017 08:06 PM      Profile for Andrew Wax   Email Andrew Wax   Send New Private Message       Edit/Delete Post 
I have my father's old Revere 85 - was watching some movies from my childhood - went to rewind and the motor did not turn on - throwing the clutch does not help - letting it cool did not help - any ideas? thinking the motor switch is shot - but it still has a lot of tension and clicks normally - before I start taking it apart I thought I would post.... tx! Andrew

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2