8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Cleaner for before stripe

 - UBBFriend: Email this page to someone!    
Author Topic: Cleaner for before stripe
Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013


 - posted August 17, 2018 10:24 AM      Profile for Luigi Castellitto   Email Luigi Castellitto   Send New Private Message       Edit/Delete Post 
For someone that stripe own films: what kind of film cleaner you use BEFORE magnetic stripe the film? It's essential practice, any dirt residues on film may not allow the track to stick well. And, be careful, the cleaner doesn't have to be also a lubricating cleaner, it would make the situation worse, the track would slide off more easily.

Lubrication is, of course, good to do after the stripe.

Thank you. [Smile]

 |  IP: Logged

Phil Murat
Jedi Master Film Handler

Posts: 671
From: Villeneuve St Georges, France
Registered: Dec 2015


 - posted August 17, 2018 11:08 AM      Profile for Phil Murat   Email Phil Murat   Send New Private Message       Edit/Delete Post 
Hi Luigi,

I made some test with "Fuel Class F" (This is used to clean clothes, It doesn't damaged plastic materials, etc...).

However, Silicon oil is very, very difficult to clean out, so that, any material which has been contaminated with silicon is difficult to paint or to bond thereafter....

To be note I know somebody who made his own lubricating component (for films) using "Fuel Class F" (250Cl) mixed with 2 or three drops of Silicon oil.

 |  IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013


 - posted August 17, 2018 01:39 PM      Profile for Luigi Castellitto   Email Luigi Castellitto   Send New Private Message       Edit/Delete Post 
It's true, Phil, Italian small format users use with success a product called "Avio" (I don't know if it has the same name in other Countries), and has a good degreasing result.
It should be the same as you indicate.
I was only wondering if there was an alternative.

I also know the formula with the addition of silicone oil, not bad as a solution, but only in the case AFTER stripe, it having a lubricating effect.

 |  IP: Logged

Douglas Meltzer
Moderator

Posts: 4554
From: New York, NY, USA
Registered: Jun 2003


 - posted August 17, 2018 02:49 PM      Profile for Douglas Meltzer   Email Douglas Meltzer   Send New Private Message       Edit/Delete Post 
Luigi,

Before striping my films I only clean them using a cloth, no solution added. The stripe adheres fine. I apply FilmGuard after the recording process.

Doug

--------------------
I think there's room for just one more film.....

 |  IP: Logged

Dominique De Bast
Film God

Posts: 4486
From: Brussels, Belgium
Registered: Jun 2013


 - posted August 17, 2018 04:15 PM      Profile for Dominique De Bast   Email Dominique De Bast   Send New Private Message       Edit/Delete Post 
Hello Luigi. I read often on French forum about a product called "essence C". I couldn't find it in Belgium and it seems that's a local reference. So I looked for it in Paris but didn't see on the shelves. I asked (after sevral attemps in diff駻ents shops) and the seller went to the backstore to pick up a bottle. They can sell it but not display it, obviousely for safety reasons. This product removes the "grease" of the film and is advised to clean it. However it doesn't lubricate. It certainely exist in other countries under other names.

--------------------
Dominique

 |  IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013


 - posted August 18, 2018 09:03 AM      Profile for Luigi Castellitto   Email Luigi Castellitto   Send New Private Message       Edit/Delete Post 
Thanks, guys, I happened to use both methods, only with dry cloth and with the degreaser.
Is that lately my stripe no longer works like a time, the main band keeps, but the compensation band comes off.
Since it worked very well before, it could be that the solvent has become old (I've had it for some time) and it has lost its function, or the reels of bands have been too old (I have for many years).

 |  IP: Logged

Jim Schrader
Phenomenal Film Handler

Posts: 1628
From: Savage, MN, USA
Registered: Jun 2003


 - posted August 18, 2018 10:05 PM      Profile for Jim Schrader   Author's Homepage     Send New Private Message       Edit/Delete Post 
Doug what kind of glue are you using? Where can one obtain it?

--------------------
jim schrader
"Let's see 電o I have that title already?"

 |  IP: Logged

Graham Ritchie
Film God

Posts: 4001
From: New Zealand
Registered: Feb 2006


 - posted August 19, 2018 12:12 AM      Profile for Graham Ritchie   Email Graham Ritchie   Send New Private Message       Edit/Delete Post 
Jim

Its been a long time since I did my own striping but am pretty sure I used Trichloroethylene 100% for cleaning the edge, going over it twice before striping.

All I can say for sure, that the stripe is still hanging on after 40 years.

Kodak did produce a film cleaner 1.1.1 Trichloroethane which I understand is now banned.

However you could try Trichloroethylene which you can still buy in 100ml bottles from a chemist on a test film.

Cleaning the film edge first is really important for the stripe to take.... [Smile]

 |  IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013


 - posted August 19, 2018 09:56 AM      Profile for Luigi Castellitto   Email Luigi Castellitto   Send New Private Message       Edit/Delete Post 
Jim, I buy the glue from FFR Film:
http://www.ffr-film.de/index.php?page=band&language=eng
In Europe I seem to remember that there are other sellers that have it, but perhaps they are supplying from the same place.
Overseas I don't know if someone sells it.

Graham, I tried to re-buy the glue, let's see if that's the problem in glue that no longer works because it's old. Otherwise, I will try to find the Trichloroethane and clean. But it would be strange if that was the problem, my two striper machines (Bolex Weberling DS 240 and Juwel mini 8S8) have always done their duty.
Thanks!

 |  IP: Logged

Jim Schrader
Phenomenal Film Handler

Posts: 1628
From: Savage, MN, USA
Registered: Jun 2003


 - posted August 19, 2018 01:03 PM      Profile for Jim Schrader   Author's Homepage     Send New Private Message       Edit/Delete Post 
Thanks Luigi, I will check them out I have very few films that have or need cleaning at least in my silent films.

--------------------
jim schrader
"Let's see 電o I have that title already?"

 |  IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013


 - posted August 19, 2018 02:22 PM      Profile for Luigi Castellitto   Email Luigi Castellitto   Send New Private Message       Edit/Delete Post 
My pleasure, Jim. [Smile] But I'll show you the page where there are "glue" and tapes for stripe.
Cleaning is another matter, for sound or mute films (before stripe, if you intend to do it) I think it's always very good Filmguard.

 |  IP: Logged

Paul Adsett
Film God

Posts: 5003
From: USA
Registered: Jun 2003


 - posted August 19, 2018 02:23 PM      Profile for Paul Adsett     Send New Private Message       Edit/Delete Post 
Stay away from Trichloroethylene - it is a known carcinogen!

--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj

 |  IP: Logged

Douglas Meltzer
Moderator

Posts: 4554
From: New York, NY, USA
Registered: Jun 2003


 - posted August 19, 2018 07:12 PM      Profile for Douglas Meltzer   Email Douglas Meltzer   Send New Private Message       Edit/Delete Post 
Jim,

I buy the glue from FFR, just as Luigi. Please note that due to shipping restrictions, only one bottle may be ordered at a time.

Doug

--------------------
I think there's room for just one more film.....

 |  IP: Logged

Jim Schrader
Phenomenal Film Handler

Posts: 1628
From: Savage, MN, USA
Registered: Jun 2003


 - posted August 19, 2018 09:20 PM      Profile for Jim Schrader   Author's Homepage     Send New Private Message       Edit/Delete Post 
That痴 great guys plan on testing it on some scrap film I have before trying it on my pride collection. And will use Doug痴 experience of cleaning with a dry clean cloth.

[ August 20, 2018, 11:07 AM: Message edited by: Jim Schrader ]

--------------------
jim schrader
"Let's see 電o I have that title already?"

 |  IP: Logged

Jim Schrader
Phenomenal Film Handler

Posts: 1628
From: Savage, MN, USA
Registered: Jun 2003


 - posted August 20, 2018 11:09 AM      Profile for Jim Schrader   Author's Homepage     Send New Private Message       Edit/Delete Post 
It figures the company is out of the office till 9-1-18

--------------------
jim schrader
"Let's see 電o I have that title already?"

 |  IP: Logged

Brad Miller
Administrator

Posts: 525
From: Dallas, TX, USA
Registered: Jun 2003


 - posted August 20, 2018 04:44 PM      Profile for Brad Miller   Author's Homepage   Email Brad Miller       Edit/Delete Post 
The best thing would be a slow ultrasonic cleaning with perchloroethylene. Machines for 35mm and 16mm are still around at numerous post houses, but 8mm is very rare to find.

For 8mm/Super 8mm film, I think Spectra Film and Video is the only place other than Film-Tech that has 8mm ultrasonic capability.

For 16mm film, numerous labs should be able to offer it for 16mm (just make sure they are using perc and not HFE/Novec).

Post-striping, FilmGuard will keep the stripe from suffering any wear during projection.

 |  IP: Logged

Jim Schrader
Phenomenal Film Handler

Posts: 1628
From: Savage, MN, USA
Registered: Jun 2003


 - posted August 21, 2018 08:31 PM      Profile for Jim Schrader   Author's Homepage     Send New Private Message       Edit/Delete Post 
Brad, is cleaning with ultrasonic capability at spectra film a job one sends out?

--------------------
jim schrader
"Let's see 電o I have that title already?"

 |  IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013


 - posted August 22, 2018 05:23 PM      Profile for Luigi Castellitto   Email Luigi Castellitto   Send New Private Message       Edit/Delete Post 
Jim, I saw now that FFR is closed. In September I will also make an order about film striping. [Smile]

Brad, I confirm that Filmguard also "helps" the audio sector, the film run smoother and the strip is more protected.

 |  IP: Logged

Brad Miller
Administrator

Posts: 525
From: Dallas, TX, USA
Registered: Jun 2003


 - posted August 22, 2018 06:50 PM      Profile for Brad Miller   Author's Homepage   Email Brad Miller       Edit/Delete Post 
Jim, yes you would send your film to them to have ultrasonically cleaned.

We also have the capability at Film-Tech, but are in the process of moving offices over the next several months, so we likely won't be taking any kind of orders during the move.

 |  IP: Logged

Jim Schrader
Phenomenal Film Handler

Posts: 1628
From: Savage, MN, USA
Registered: Jun 2003


 - posted August 23, 2018 07:54 AM      Profile for Jim Schrader   Author's Homepage     Send New Private Message       Edit/Delete Post 
ok, Luigi keep me posted i will keep checking back with the site in September.

--------------------
jim schrader
"Let's see 電o I have that title already?"

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2