8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Kodascope Eight-33 projector lamp removal

 - UBBFriend: Email this page to someone!    
Author Topic: Kodascope Eight-33 projector lamp removal
Steve Hartwell
Junior
Posts: 28
From: St Catharines, Ontario, Canada
Registered: Jan 2014


 - posted August 25, 2018 04:50 PM      Profile for Steve Hartwell   Author's Homepage   Email Steve Hartwell   Send New Private Message       Edit/Delete Post 
Anybody know how to remove a lamp/bulb from a Kodascope Eight-33

It lit for about 6 times I was experimenting but now it tries but won't. I suspect corrosion and tried to remove it to clean off the bottom, but 1/ I don't know which way to turn it, and, 2/ appears the metal receptacle base is also corroded around the lamp base

--------------------
steve
www.homemovies.ca

 |  IP: Logged

Bill Phelps
Phenomenal Film Handler

Posts: 1482
From: USA
Registered: Jan 2009


 - posted August 25, 2018 05:19 PM      Profile for Bill Phelps     Send New Private Message       Edit/Delete Post 
This is from memory but try gently pushing down and turn about a quarter turn to the left.....

 |  IP: Logged

Paul Adsett
Film God

Posts: 5003
From: USA
Registered: Jun 2003


 - posted August 25, 2018 05:28 PM      Profile for Paul Adsett     Send New Private Message       Edit/Delete Post 
Be very careful! If it breaks it will really cut up your hand! [Eek!]

--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj

 |  IP: Logged

Steve Hartwell
Junior
Posts: 28
From: St Catharines, Ontario, Canada
Registered: Jan 2014


 - posted August 25, 2018 10:16 PM      Profile for Steve Hartwell   Author's Homepage   Email Steve Hartwell   Send New Private Message       Edit/Delete Post 
Thanks Bill, I tried easy-down-push-turn, but, as stated looks like the metal bottom of the lamp and the metal socket it goes into have corroded together so the lamp won't move.

As Paul said - be vary careful or the lamp will break, so I didn't dare try any more force.

But I guess I don't have any choice now but to try harder, using some kind of protection against broken glass.

I do have two more lamps in case I break the original.

Thanks to both of you, Bill and Paul, for replying to my original posting.

--------------------
steve
www.homemovies.ca

 |  IP: Logged

Joe Taffis
Phenomenal Film Handler

Posts: 1592
From: United States
Registered: Jun 2003


 - posted August 26, 2018 01:20 PM      Profile for Joe Taffis   Email Joe Taffis   Send New Private Message       Edit/Delete Post 
Steve, try using a spray like CRC electric contact cleaner around the base. It may free it up and doesn't leave any residue...

--------------------
Joe Taffis

 |  IP: Logged

Barry Fritz
Phenomenal Film Handler

Posts: 1061
From: Burnsville, MN, USA
Registered: Dec 2009


 - posted August 26, 2018 01:22 PM      Profile for Barry Fritz   Email Barry Fritz   Send New Private Message       Edit/Delete Post 
See if you can locate an electrical detox/ lubricating spray on-line. Squirting that in and around the socket and base may help if it is corroded in. Once
Lamp is out, wipe off any lube residue in or on the socket. It won't harm the electical components but may not tolerate heat from the lamp.

 |  IP: Logged

Barry Fritz
Phenomenal Film Handler

Posts: 1061
From: Burnsville, MN, USA
Registered: Dec 2009


 - posted August 26, 2018 05:58 PM      Profile for Barry Fritz   Email Barry Fritz   Send New Private Message       Edit/Delete Post 
See if you can locate an electrical detox/ lubricating spray on-line. Squirting that in and around the socket and base may help if it is corroded in. Once
Lamp is out, wipe off any lube residue in or on the socket. It won't harm the electical components but may not tolerate heat from the lamp.

Moderators, please delete this double post. Don't know how this happened.

 |  IP: Logged

Steve Hartwell
Junior
Posts: 28
From: St Catharines, Ontario, Canada
Registered: Jan 2014


 - posted August 26, 2018 09:14 PM      Profile for Steve Hartwell   Author's Homepage   Email Steve Hartwell   Send New Private Message       Edit/Delete Post 
Joe and Barry, thanks for the suggestions to spray. [Smile]

I sprayed all around quite liberally with "Electronics Contacts Cleaner with Silicone" waited a few minutes and that did the trick. I was able to hand remove the lamp, file off the corrosion from the bottom of the lamp, and emery paper off the corrosion on the projector contact.

Put the lamp back in and it works like a charm.

I recently had this 1930s projector 'donated' to me along with a bunch of other cameras and projectors by a customer lady who's father recently passed away in Niagara Falls Canada, he had bought it and a 1930s Cine-Kodak Eight-25 movie camera back in the 1940s. Then he later bought a couple of those 1950s brownie movie cameras, and later a couple more cameras and projectors.

Holy doodle, this Eight-33 projector and the Eight-25 camera are in immaculate condition, still working after almost 80 years ! they are real beauts

I'm planning to use them at a local festival exhibit in September to show young kids how things used to be done and spread the word about my youtube channel of old historical homemovie and professional films of Canada.

So, thanks for the suggestions everybody to get the lamp working again.
[Smile] [Smile]

--------------------
steve
www.homemovies.ca

 |  IP: Logged

Bill Phelps
Phenomenal Film Handler

Posts: 1482
From: USA
Registered: Jan 2009


 - posted August 26, 2018 09:40 PM      Profile for Bill Phelps     Send New Private Message       Edit/Delete Post 
Glad to hear the projector is up and running! That is very cool that you are going to show off the equipment to the youngsters. The cameras and projectors from years ago are very well built and I'm sure the kids will be impressed. [Smile]

 |  IP: Logged

Steve Hartwell
Junior
Posts: 28
From: St Catharines, Ontario, Canada
Registered: Jan 2014


 - posted August 27, 2018 10:33 AM      Profile for Steve Hartwell   Author's Homepage   Email Steve Hartwell   Send New Private Message       Edit/Delete Post 
Thanks Bill,

Yes, eh, imagine being able to buy anything these days that would still be working 80 years from now.

And betcha at least one kid will ask me - "where's the sound ?"

hahaha LOL

--------------------
steve
www.homemovies.ca

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2