8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Trying to fix Sankyo 702 motor electronics. Any schematics for any of the Sankyo's?

 - UBBFriend: Email this page to someone!    
Author Topic: Trying to fix Sankyo 702 motor electronics. Any schematics for any of the Sankyo's?
David Unruh
Junior
Posts: 7
From: Woonsocket, RI, USA
Registered: Apr 2019


 - posted April 15, 2019 06:15 PM      Profile for David Unruh     Send New Private Message       Edit/Delete Post 
Trying to diagnose my Sankyo 702 motor drive. I'm getting good power to the motor side of the board after the bridge rectifier. 36 volts dc. Looks like motor and main transistor are good, I can run a jumper between transistors brown trigger wire and red wire and it runs. But I'm not getting good voltage to that brown wire from the board, only about .9 volts. Are there any schematics for any of the Sankyo's and what the voltages should be?

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2