8mm Forum: Elmo ST-1200 HD MO - Modified to 20FPS?

»	8mm Forum » 8mm Forum » Elmo ST-1200 HD MO - Modified to 20FPS?

UBBFriend: Email this page to someone!

Author

Topic: Elmo ST-1200 HD MO - Modified to 20FPS?

Rich Anderson
Junior
Posts: 1
From: Orange County, CA, USA
Registered: May 2019

posted May 06, 2019 11:11 PM

Hey All,
I was an active member of this forum a decade ago and have recently decided to clear out my projector collection.

At some time I acquired a couple Elmo ST-1200's. Thie one being a HD-MO. I never used it, just collected it with my others. While going through them all I found this one labeled "20 FPS". It also has been modified with additional fog glass in front of the bulb.

I can only guess it was at one time a telecine rig, but with the advent of newer HD cameras without interlacing I don't know if it has any use any more.

Would a 20FPS projector still be in favor on Ebay or on here?

Or would it be wise to convert back to 24?

I'll list everything on the proper forum at a later time, but this one had me a little puzzled.

Don't worry. I'm keeping one elmo and my horror movie collection for Halloween screenings!

Thanks in advance!

| IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007

posted May 07, 2019 02:31 AM

Rich
Obviously, this model is always used for showing sound films, both optical and magnetic. However, if it only runs at 20fps then it's no good for showing sound films.
If you intend to sell it I suggest you get it working at 24fps.

--------------------
Maurice

| IP: Logged

Leon Norris
Jedi Master Film Handler

Posts: 958
From: Elkins Park, PA, USA
Registered: Jun 2012

posted May 18, 2019 10:17 AM

It sounds like its made for film to video transfer! Do this machine have the variable speed knob on it?

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2