8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm equipment for sale/trade   » Bell & Howell MX43 - clutch wheel (?) not spinning

 - UBBFriend: Email this page to someone!    
Author Topic: Bell & Howell MX43 - clutch wheel (?) not spinning
Andre Bouchard
Junior
Posts: 3
From: Hamilton, MA, USA
Registered: Dec 2014


 - posted December 04, 2014 01:48 PM      Profile for Andre Bouchard   Email Andre Bouchard   Send New Private Message       Edit/Delete Post 
My projector does not turn unless I open the projector and manually spin the clutch wheels (think that's what they're called). I can adjust the clutch wheels with 2 adjustment screws but they don't seem to have any effect.

There is a spindle in the projector with a rubber or plastic knob on the end. This spindle drives the clutch wheels. The spindle spins fine. My guess is that the plastic knob on the end of the spindle is simply worn down and isn't grabbing the clutch wheels like it should.

Has anyone repaired the spindle knob (sorry, I don't know all of the proper terminology)? I've considered disassembling and trying a few options like rubber bands, tape, etc., but if there's a more preferred/more permanent fix I'd be interested. I assume that the actual part is no longer available for this projector. I can't tell what the original shape of the part was so any repair I attempt will be trial and error.

Thanks

 |  IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011


 - posted December 04, 2014 02:36 PM      Profile for Janice Glesser     Send New Private Message       Edit/Delete Post 
Did the spindles just stop turning recently or did you buy the projector in this condition. A picture of the worn part in question would be helpful.

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2