8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Loosing Loop with kodak Pageant

- UBBFriend: Email this page to someone!    
Author Topic: Loosing Loop with kodak Pageant
Bradford A Moore
Master Film Handler

Posts: 272
From: Provincetown, Ma
Registered: Jul 2005

- posted July 15, 2010 08:07 AM      Profile for Bradford A Moore     Send New Private Message       Edit/Delete Post 
Hey All,

For the most part I have a nice working Pageant. It is a little finicky when it comes to splices, and sometimes wants to loose the loop. Any suggestions on something that may need to be tightened, or loosened. I have been lucky so far that I haven't lost any sprockets. but it is a hassel to stop and fix the problem.

 |  IP: Logged
Wayne Tuell
Master Film Handler

Posts: 488
From: Minden, NV
Registered: Jul 2009

- posted August 13, 2010 12:50 AM      Profile for Wayne Tuell   Author's Homepage   Email Wayne Tuell   Send New Private Message       Edit/Delete Post 
I found on my Pageant that some of the time it seems as if it were my bad splices causing the problems. Also, if I had an older print with a cement splice, right at the splice the film shrinks I guess from the glue, and causes major problems.

--------------------
www.16mmDrive-InFilms.com

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2