8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Do they sell plastic parts placed inside reels to prevent bending during shipping

 - UBBFriend: Email this page to someone!    
Author Topic: Do they sell plastic parts placed inside reels to prevent bending during shipping
Robert Lee
Film Handler

Posts: 70
From: San Francsico, CA, USA
Registered: Jan 2017


 - posted March 17, 2017 12:50 PM      Profile for Robert Lee   Email Robert Lee   Send New Private Message       Edit/Delete Post 
I've seen it in 8mm reels that comes in a new projector. I would like a 16mm version so I can ship reels between worrying it getting bent. Any tricks of the trade to prevent deformation/damage of reels during shipping?

 |  IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011


 - posted March 17, 2017 05:36 PM      Profile for Janice Glesser     Send New Private Message       Edit/Delete Post 
Hi Robert...Here's one suggestion...I haven't tried this with 16mm...but in theory it should work.

1) Cut a strip of heavy poster board the width size a little wider than 16mm film and the circumference of the outer portion of the reel (recessed about 1/4" from the edge).

2) Attach the two ends with a staple to form a circle.

 -

3) Place the circle around the reel so it fits on the inside of the outer edge of the reel. The outer edges of the reel should now be secured from collapsing and held snugly in place against the poster board insert.

 -

Of course wrapping it in bubble-wrap will give it additional protection.

[ March 17, 2017, 07:03 PM: Message edited by: Janice Glesser ]

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

 |  IP: Logged

Clinton Hunt
Jedi Master Film Handler

Posts: 845
From: Waharoa,North Island,New Zealand
Registered: May 2010


 - posted March 17, 2017 06:23 PM      Profile for Clinton Hunt   Author's Homepage     Send New Private Message       Edit/Delete Post 
Great idea Janice.
My Elmo ST-600 came in its original box and the 600ft reel was packaged with polystyrene,a complete circle cut in half that just slides in on both sides to keep its perfect shape.
Brilliant idea as there's nothing worse than a buckled reel that causes the film to catch as it winds.

--------------------
Cheers from me in New Zealand :-)

 |  IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011


 - posted March 17, 2017 06:51 PM      Profile for Janice Glesser     Send New Private Message       Edit/Delete Post 
Yes Clinton I have made those same kind of spacer inserts for 8mm reels out of cardboard. I layer 2-3 piece depending on the thickness of the cardboard. However...This is not an easy method. Cutting cardboard into custom shapes takes a lot of time and patients. Although possible...I don't see it being practical for 16mm.

 -

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

 |  IP: Logged

Robert Lee
Film Handler

Posts: 70
From: San Francsico, CA, USA
Registered: Jan 2017


 - posted March 17, 2017 09:59 PM      Profile for Robert Lee   Email Robert Lee   Send New Private Message       Edit/Delete Post 
Thanks for the tip.

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted March 18, 2017 03:17 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
You could just use carefully folded newspaper as it's only to be used for travelling.

--------------------
Maurice

 |  IP: Logged

Terry Sills
Phenomenal Film Handler

Posts: 1423
From: Weymouth,Dorset,England
Registered: Oct 2012


 - posted March 18, 2017 06:27 AM      Profile for Terry Sills     Send New Private Message       Edit/Delete Post 
Or just fill the gap with bubble wrap.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2