8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Anamorphic Alignment

 - UBBFriend: Email this page to someone!    
Author Topic: Anamorphic Alignment
Colin Fish
Film Handler

Posts: 68
From: Eastbourne, UK
Registered: Nov 2016


 - posted January 26, 2018 01:48 PM      Profile for Colin Fish   Email Colin Fish   Send New Private Message       Edit/Delete Post 
Hello All, As a follow up to my curved screen enquiry, I did build a curved screen. It happened that there was slight distortion on the outer edges. I rebuilt the screen flat and I am still getting distortion on the outer edges. It may be that my calculations were wrong on the curve. However, it has been suggested that my anamorphic lens may be out of alignment on the front and rear optics. Any suggestions before I rip down the screen and start again? I am using a Schneider scope lens with frontal lock and focus.

 |  IP: Logged

Terry Sills
Phenomenal Film Handler

Posts: 1423
From: Weymouth,Dorset,England
Registered: Oct 2012


 - posted January 26, 2018 03:49 PM      Profile for Terry Sills     Send New Private Message       Edit/Delete Post 
Colin
Is the lens you are using one that is designed for 16mm projectors. If it is for a 35mm projector I can imagine that you would get this problem. In any case Anamorphic lenses are not designed to give good focus on a curved screen, that would be Cinerama and would require the appropriate lens I think. I have Anamorphic lenses and they give excellent overall focus on a flat screen.

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted January 27, 2018 02:12 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
quote:
This is a 35mm setup with a 55mm lens
Last November you quoted the above. Can you please explain?
What gauge projector are you using, and how is the Schneider anamorphic attached to your backing lens?

--------------------
Maurice

 |  IP: Logged

Mark Mander
Phenomenal Film Handler

Posts: 1236
From: Dunstable ,Bedfordshire.
Registered: Jan 2005


 - posted January 27, 2018 02:14 AM      Profile for Mark Mander     Send New Private Message       Edit/Delete Post 
As it's now on a flat screen it's more likely to be the scope lens,did you focus the prime lens then after attaching the scope lens refocus that?Mark

--------------------
Elmo GS1200 1.0 lens
Elmo ST1200HD 1.1 lens
Sankyo 800 1.0 lens
Elmo 16CL
Elf NT1

 |  IP: Logged

Colin Fish
Film Handler

Posts: 68
From: Eastbourne, UK
Registered: Nov 2016


 - posted January 27, 2018 05:00 AM      Profile for Colin Fish   Email Colin Fish   Send New Private Message       Edit/Delete Post 
The gauge is 35mm. I have installed both a 55mm Isco and a 60 mm Isco lens to see if there is any difference. These lenses on there own give a good sharp image on the squeezed picture. I then screw the anamorphic on to the front of the backing lens making sure the image is focused in the centre of the screen. As I run the film I can focus the outer edges separately and get them sharp, then the centre is out.

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted January 27, 2018 05:35 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Colin
Does the anamorphic show a range of focusing distances? If, so, what is the marked minimum distance.
Most ex-cinema anamorphics (as I believe your Schneider is) would never focus down to your stated 12 foot throw.

--------------------
Maurice

 |  IP: Logged

Colin Fish
Film Handler

Posts: 68
From: Eastbourne, UK
Registered: Nov 2016


 - posted January 27, 2018 01:38 PM      Profile for Colin Fish   Email Colin Fish   Send New Private Message       Edit/Delete Post 
Hello Maurice, The lens focuses from 10ft to infinity.

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted January 27, 2018 01:46 PM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Colin
Thanks for that. The anamorphic should be alright. But obviously is not. Perhaps it is faulty in some way.

--------------------
Maurice

 |  IP: Logged

Steven J Kirk
Jedi Master Film Handler

Posts: 873
From: Southern England
Registered: Apr 2008


 - posted January 28, 2018 09:32 AM      Profile for Steven J Kirk   Email Steven J Kirk   Send New Private Message       Edit/Delete Post 
I think the curved screen is out. It can only be a very shallow curve with a short throw.

Aside from any aesthetic curved effect, the curve on very large cinema set ups with a single lens is required in that if the screen were perfectly flat the edges of the screen would be further away from the lens than the centre. Think of it as a triangle. You are curving the screen to bring the left and right edges back within the focal depth of the lens. It isn't guesswork, it has to be calculated. Factor in also the focus of the anamorphic. Remember, as I see it the curved screen was a choice for Cinerama but a necessity only for 70mm - CinemaScope doesn't really require a curve, in my opinion. Hope this helps.

[ January 28, 2018, 05:08 PM: Message edited by: Steven J Kirk ]

--------------------
VistaVision
Motion Picture High-Fidelity

 |  IP: Logged

Colin Fish
Film Handler

Posts: 68
From: Eastbourne, UK
Registered: Nov 2016


 - posted January 29, 2018 01:18 PM      Profile for Colin Fish   Email Colin Fish   Send New Private Message       Edit/Delete Post 
Thanks for that Steven. I will try to test another anamorphic.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2