8mm Forum: Wanted Pathecope parts

This is topic Wanted Pathecope parts in forum 9.5mm for sale/trade/wanted at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=10;t=000121

Posted by Mike Byrne (Member # 5701) on December 13, 2016, 02:16 AM:

I am looking for an original lens. (The one with the projector is marked "made in France" but is a fraction oversize and also the small screwed in rear lens is loose in the thread.
I also need one "U" shape clip that is held on by one screw and is on both of the toothed wheels.This one is for the lower wheel and I am assuming that they are identical. Not sure of the purpose of them, but one good reason may be that they are only there to stop you loading the film on wrong side of toothed wheel.
Many thanks for any help.
I also need the "pathescope" script badge for the lens cover, or a good sharp photo, so I can get a repro made.
Mike.

[ December 21, 2016, 03:39 PM: Message edited by: Mike Byrne ]

Posted by Mike Byrne (Member # 5701) on February 19, 2017, 09:39 AM:

I should have stated the model. Pathescope 200 B

UBB.classic^TM 6.3.1.2