This is topic Spindle Hubs for GS 1200 in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=000193
Posted by Michael De Angelis (Member # 91) on November 16, 2003, 01:15 PM:
I have noticed difficulty in mounting some plastic
film reels onto the supply and take up reel spindles
of my GS 1200. The Supply hub has the most damage.
Under close examination, I have noticed small pieces of
the silver metal spindle hub, either crack, flake off or break apart.
Ultimately, it becomes difficult to mount or dismount a
film reel or spool. The tolerance is extremely snug and
pieces of the inside of the film reel become scored; shreding
off pieces of spool plastic.
Is there any way to fix this or replace the parts?
Michael De Angelis
Posted by Kevin Faulkner (Member # 6) on November 16, 2003, 03:39 PM:
I have never seen this problem before and have owned GS1200's for over 20yrs. Any chance you can take a digital pic showing the problem.
Kevin.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2