This is topic Elmo Rewind Arms- A question in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=000315

---

Posted by Tony Milman (Member # 7) on January 18, 2004, 07:51 AM:
 
I have been wondering what the threaded hole on the right hand side of the Elmo 1200ft rewind arms is intended to be used for.

There is no bolt in either hole but the recess is threaded as if to accept one

Anyone have an idea?

Thanks

Tony
 

---

Posted by Chris Quinn (Member # 129) on January 18, 2004, 10:10 AM:
 
Hi Tony,
This is just where the grub screw is fitted, undo and you can remove the shaft that holds the gearing on, is your grub missing??
Chris,
 

---

Posted by Tony Milman (Member # 7) on January 21, 2004, 03:50 PM:
 
Chris

What a Dope! Yep, now I shine a torch into the holes I see the grub screws-thanks! oops
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2