This is topic Elmo ST1200 Capstan Roller Problems in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=000734
Posted by Chip Gelmini (Member # 44) on September 16, 2004, 12:01 AM:
 
Now I am not sure if this is correct, but here goes.

On one machine, no matter what film plays through, the capstan rollers move up and down producing major wow and flutter (garbaled sound). This one machine also does not like the Neumade Fiesta leader. It jamms during autoload right at the bottom sprocket.

This problem is only happening on this one machine. Does anyone have some ideas?

CG
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2