This is topic One last update for Elmo rollers in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=000881
Posted by Tom Photiou (Member # 130) on November 08, 2004, 02:49 PM:
 
Sorry if i'm going on a bit on this topic but i promised to keep an update.
The engineers are finally getting the centre hole correct and all being well i'm hoping to get a sample sent to a Number 1 Elmo repair specialist for approval.Hopefully my next add on to this subject will be to let you all know there ready. [Wink]
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2