This is topic GS-1200 speaker cords? in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=001572
Posted by Dan Lail (Member # 18) on November 09, 2005, 11:44 PM:
Can the part #SC-002 speaker cords for a GS-1200 be found in a Radio Shack, etc. I'm of course talking about a generic connector to plug into the speaker outs.
Posted by Alan Rik (Member # 73) on November 09, 2005, 11:55 PM:
Hey Dan,
You can get the speaker plugs from Steve Osborne at the Reel Image Im pretty sure. I think I saw it in one of his ads.
Posted by Kevin Faulkner (Member # 6) on November 10, 2005, 01:37 AM:
They are standard DIN speaker plugs and should be available at any outlet such as radio shack.
Kev.
Posted by Dan Lail (Member # 18) on November 10, 2005, 01:45 AM:
Thanks Alan & Kev. Looks like the Reel Image is under remodeling. So, the standard DIN is the one. Kev, would that be a three pin?
Posted by Kevin Faulkner (Member # 6) on November 10, 2005, 05:34 AM:
Hi Dan,
It has a flat spade and one round pin as per the pic below.
Kev.
Posted by Dan Lail (Member # 18) on November 10, 2005, 12:02 PM:
Aaaaaah! Now I understand. Excellent! Thanks, Kevin.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2