8mm Forum: Belt help please???

This is topic Belt help please??? in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=002309

Posted by Mark Todd (Member # 96) on December 05, 2006, 05:53 PM:

Hi just taken a joined nylon hot weld belt jobby from my std 8 machine.
Its 295mm long maybe 3mm or just under 3mm across.
I would say 4mm would be better looking at the pulleys.
Anyone please got a belt from something like that so I can pin one down to buy.
It runs over a 3rd roller to turn the lmap fan if you will.
Do you think at 4mm I may need 300mm or should I stick at 295.
Many thanks in advance Mark.

Posted by Glenn Brady (Member # 715) on December 05, 2006, 06:30 PM:

Maybe I've misunderstood your inquiry, but hot-melt belting is available from Isoplethics.

Posted by Mark Todd (Member # 96) on December 06, 2006, 03:39 AM:

Sorry I meant I was after pinning down a proper endless belt, however thanks for the very handy link.
Best Mark.
PS think I may have one from the I sell projector belts chap in the US, very helpful but still open to suggestions.
Thanks Mark.

UBB.classic^TM 6.3.1.2